People generally go for their deck sanding for cleaning and smoothing their deck surface, so that splinters and bumps can be removed or repaired. The sanding is a fantastic process however unless you follow the right process you cannot bring back the life of your deck.

For this reason, you must go for a certain company like 689 Pty Ltd which is a well-known Gold Coast flooring company that can offer a professional sanding service for the deck.

How should you go about sanding your deck?

While going for your deck sanding, though it may be a small job it is important that you must get yourjob done by a certain professional timber decking sanding services. However, if you like to go in a DIY way then you must ensure the following:

• Use proper safety equipment e.g. gloves, earmuffs, masks, and goggles
• Proper sanding belt with finishing sander
• Suitable cleaning equipment
• Hammer
• Nail punch

The following are a few steps to follow for the sanding work of your deck.

• Prepare the deck

To start with, you must check that no nails must stick out of any boards. In case there is any then your sanding belt may get rippedup. Simply have a proper look and make sure that all the boards have been nailed down by using a hammer and nail punch as needed to fix.

• Sand the deck

Your floor installer from Gold Coast will then use a belt sander, which is the right way of getting your deck done swiftly. For removing the stain that is at present noticed on the deck, prefer to use coarse sandpaper, and after that, use fine sandpaper so that you can prepare it for offering the new coat.

• Sand the edges

Now by using your finishing sander, try to get into the various edges of the deck where you find that your belt sander will not be able to reach comfortably. After that, again, try to use your coarse sandpaper then followed by your fine sandpaper once again.

• Tidy up

After completing the sanding work in the above step, you will be able to see plenty of sawdust scattered all-around your deck. So, grab any cleaning materials for sweeping all these up. Otherwise, they will offer you an uneven type of finish when you are going to apply the paint or stain.

• Apply the fresh look

Finally, once you are through with sanding and tidying it up, now you are ready for applying a new coating or stain of paint or varnish so that you can offer a completely new appearance to your deck floor.  You can select the kind of paint that you want for your deck.-

Author’s Bio

This article was written by Alex. He has been with Busy Fox – Better SEO for many years. The organisation has a reputation of providing end-to-end search engine optimization services at affordable prices. Please visit their website to choose which SEO bundle is best for your digital business.

Danny White